Call Me FreeCall Me Free Send SMS
Home » Products » Silicone Adhesive » High Temperature Adhesive SH916 series for PET or PI tape

High Temperature Adhesive SH916 series for PET or PI tape

High Temperature Adhesive SH916 series for PET or PI tape
Send Inquiry
Product Code : SH-916
Brand Name : Sihai
Price And Quantity
  • Minimum Order Quantity
  • 25 Kilograms
  • Price Range
  • 5.90 - 7.50 USD ($)
  • Price
  • 7.5 USD ($)
Product Specifications
  • Holding Power
  • 200-1000 Newtons per Millimetre Squared (N/mm2)
  • Storage Temperature
  • 0-35 Celsius (oC)
  • Material
  • Silicone, PVC, Polyimide, PE
  • Adhesive Type
  • Pressure Sensitive
  • Tensile Strength
  • 200-1000 Newtons per Millimetre Squared (N/mm2)
  • Glue thickness
  • 22-25 Micromete (micron)
  • CAS No
  • 5997981
  • Usage
  • Construction
  • Grade
  • Industry Grade
  • Purity
  • 60%
  • Application
  • High Temperature Adhesive SH916 series for PET or PI tape
  • Color
  • Colorless transparent viscous liquid
  • Physical State
  • Liquid
Product Description

 

 

Model Number

PSA9162

PSA9165

PSA9168

PSA9169

Physicochemical

Index

Appearance

Colorless transparent viscous liquid

Solid Content(150℃*2h), %

52-55

56-58

59-61

58-60

Viscosity(25℃), cp

5-11w

3-9w

3-12w

3-12w

PH

7

7

7

7

Specific Gravity(25℃)

0.98

0.98

0.98

0.98

Adhesion properties after vulcanization

Initial adhesion(Steel Ball Number, ∠30)

≤16

14-23

16-23

19-24

Peel Strength

PET Transparent film(g/25um)

200-300

400-600

≥900

≥1000

Adding color paste 1%(g/25um)

80-150

300-500

≥800

≥950

Persistent Adhesivity(230℃*3h)

No displacement

Temperature Resistance(230℃*30min)

Hot stripping without residue

 

 

Model Number

PSA916B

Physicochemical

Index

Appearance

Colorless transparent viscous liquid

Solid Content(150℃*2h), %

59-61

Viscosity(25℃), cp

3-10w

PH

7

Specific Gravity(25℃)

0.98

Adhesion properties after vulcanization

Initial adhesion(Steel Ball Number, ∠30)

14-23

Peel Strength(PI film,g/25um)

400-700

Persistent Adhesivity(270℃*3h)

No displacement

Temperature Resistance(270℃*30min)

Hot stripping without residue

·        Thisproduct should be used with curing agent ,

·        â€»ï¼šTheusage ratio is during 1:1.5% - 1:1.8%

 

Instruction for usage

●Due to different factors such as substrate, coating equipment,curing period and required characteristics, the addition of curing agent(peroxide can be used ,such as BPO or DPP, recommend with BPO) is 1-3% of theamount of glue. In order to ensure the best mixture of the curing agent and theadhesive, the curing agent needs to be completely dissolved in the solvent andthen added to the glue solution and mixed well. At the same time, the dilutionliquid should be filtered once with more than 180 mesh filter screen beforecoating on the machine, to prevent color paste or other impure particles.

●The curing agent can be used to accelerate the curing speed or allowthe curing at low temperature, and it also can improve the cohesion strength ofthe adhesive and improve the adhesion property of the adhesive. The mixedperoxide  dispersible  liquid should be used up within 1-2 days.That is because peroxide will lose its activity quickly in the solvents. Thesufficient dispersion of adhesive and peroxide in the mixing process is thenecessary condition to ensure the consistency of the finished product.

●SH - 916 adhesive can be directly coated with traditional tapecoating equipment. The adhesive can be further diluted with the compatiblesolvent such as methylbenzene, dimetheylbenzene before coating. The advisableworking liquid concentration is 35%. The concrete concentration is according toyour respective equipment and experience. When using the solvents, pleaseensure that it is good ventilated and comply with safety precautions andregulations of solvent suppliers.

 â—In someapplications, because of the lack of combination degree of the adhesive andbacking material, it may be necessary to coat the prime coating before coatingthe adhesive. The primer coating must be cured before using, and the curingconditions depend on the equipment's performance, the type of base material andthe formula used.

 

HighTemperature Adhesive surface curing cycle and safety attention

●Surface curing cycle: 60 ~ 90 ℃ * 1 min  Eliminate the solvent to ensure that there is no solvent in the glue when it enters the solidification zone; 140 ~ 170 ℃ * 2 min,through the thermal curing to further improve the adhesive force, cohesive strength and initial adhesion. But the exact conditions required for full vulcanization depend on the length, temperature and efficiency of the furnace,the type of curing agent and the type of substrate used. It must be tested on the device to determine the condition.

 â—If the equipment and substrate allow higher curing temperature, the curing time can be shortened. Compared to low temperature curing, the high curing temperature can increase the cohesive strength of the adhesive in a shorter time.

 

Packaging, storage and transportation

Be packed in clean, dry 200kg  iron drums and sealed. In the storage and transportation it must be closed ina cool ventilated and dry environment, avoid rain and sun exposure and avoid contacting with acid, alkali or alkaline compounds and heavy metals. The storage period is6 months. Exceeding the time it can be retested according to the rules again tocheck if it is qualified. Stored and transported as flammable goods.

 

Safe and environment protection

Coating and using this product must beprocessed according to various national quality, health, safety andenvironmental protection standards and regulations. The product must be operated by professional operators (or obtain training and authorized person)at the production site according to the product specification, the application construction, MS DS(hazardous chemical materials safety technical specifications) and the guide on the certificate of approval on the packaging container. If you have not read the above information, especially MS DS, you cannot use this product. The following items can be found in the MSDS provided:

● Hazardous properties

● Fire extinguishing method, fire extinguishing agent and fire extinguishing attentions

● Operation attentions and safety protection, transportation matters

● Waste packaging processing method: There may be some toxic remains in the empty containers. It must be processed according to the international standard, state standard, environment protection law and local regulations. All the remaining powder, liquid, viscous materials in the container must be removed from the container. Recycling of waste materials and containers must comply with environment regulations.

Payment &Shipping:
1.Payment:T/T,Western Union
2. Sample by UPS / DHL / FEDEX(door to door)
3.
Goods by sea orsino-european freight train

Delivery:
1.Sample is within 3days to delivery.
2.Wholesales Orders : 3-5days according various quantities

Attention:
In the storage and transportation it must be closed ina cool ventilated and dry environment, avoid rain and sun exposure and avoidcontacting with acid, alkali or alkaline compounds and heavy metals. Thestorage period is 6 months. Exceeding the time it can be retested according tothe rules again to check if it is qualified. Stored and transported asflammable goods.

Package: Be packed in clean, dry iron drums and sealed

Trade Information
  • FOB Port
  • Shang hai port
  • Supply Ability
  • 50000 Kilograms Per Month
  • Delivery Time
  • 3-15 Days
  • Sample Available
  • Yes
  • Sample Policy
  • Free samples are available
  • Packaging Details
  • 20/50/200/1000kg/barrel
  • Main Export Market(s)
  • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
  • Main Domestic Market
  • All India
  • Certifications
  • BRC, ISO, SKS, HALAL PRODUCT,KOSHER ,

Hubei Zhuo Xuan Yang international Trading Co. Ltd.
X


Back to top